Specifications - NAD C 272 Service Manual

SPECIFICATIONS

STEREO MODE
CONTINUOUS AVERAGE POWER
OUTPUT INTO 8 OHMS OR 4 OHMS
(Min. power per channel, 20 Hz – 20 kHz, both
channels driven, with no more than rated
distortion)
Rated Distortion
(THD 20 Hz – 20 kHz)
Clipping power
(maximum continuous power per channel).
IHF dynamic headroom at 8 ohms
IHF dynamic power
(Maximum short term power per channel) 8 ohms:
Damping factor
(ref. 8 ohms 50Hz)
Input Impedance
Input sensitivity (for rated output into 8 ohms)
Voltage gain
Frequency response 20 Hz – 20 kHz
Signal / Noise ratio, A-weighted
BRIDGED £¨ MONOPHONIC£© MODE
CONTINUOUS AVERAGE POWER
OUTPUT INTO 8 OHMS
(Min. power per channel, with no more than rated distortion)
IHF dynamic headroom at 8 ohms
IHF dynamic power
IHF dynamic power
DIMENSIONS AND WEIGHTS
Net Weight
Shipping Weight
Dimension (W × H × D)
4 ohms:
2 ohms:
8 ohms:
4 ohms:
2
= 150 W (21.8 dBW)
= 0.03%
= 170 W
= +2.3 dB
= 230 W (23.6 dBW)
= 410 W (26.1 dBW)
= 520 W (27.2 dBW)
> 150
R = 20 kohms
C = 470 pF
1.2 V¡À0.1V
29 dB
¡À0.3 dB
- 3 dB at 3 Hz/70 kHz
> 100 dB ref. 1 W
> 120 dB ref. rated power
330 W 25.2 dBW£©
3 dB
800 W (29.0 dBW)
1200 W (30.8 dBW)
12.5 kg ( 27.5 Ib)
14.2 kg ( 31.3 Ib)
435 × 133 × 350 mm