Network Settings - Dukane 8934 User Manual

2. Web Control
2.1 Projector Web Control (continued)

2.1.3 Network Settings

Item
Projector Name
IP Configuration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default Gateway Configures the default gateway when DHCP is disabled.
DNS Server Address
AMX D.D.
(AMX Device
Discovery)
Crestron e-Control
Click the [Apply] button to save the settings.
12
Displays and configures network settings.
Configures the name of the projector.
The length of the Projector Name can be up to 64 alphanumeric
characters. Only alphabets, numbers and following symbols can
be used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Particular projector name is pre-assigned by default.
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the DNS server address.
Configures the AMX Device Discovery setting to detect the
projector from the controllers of AMX connected to the same
network. For the details of AMX Device Discovery, visit the AMX
web site.
URL: http://www.amx.com
Set whether to or not to use Crestron e-Control
If you choose Disable, the Logon window of Projector Web
Control will be displayed at first, but the selection window will
not appear.
Description
® .