Subscribe to Our Youtube Channel
Related Manuals for Medel MP7 Quick
Summary of Contents for Medel MP7 Quick
- Page 1 ISTRUZIONI PER L’USO / INSTRUCTION MANUAL MP7 QUICK TERMOMETRO ISTANTANEO A RAGGI INFRAROSSI INSTANT INFRARED THERMOMETER THERMOMETRE INFRAROUGE INSTANTANE INSTANT INFRAROT THERMOMETER...
-
Page 2: Table Of Contents
We congratulate you on your purchase of the MEDEL MP7 QUICK instant infrared thermometer. The MEDEL MP7 QUICK instant infrared thermometer is a high quality product incorporating the latest technology and tested in accordance with international standards. With its unique technology, MEDEL MP7 QUICK can provide a stable, heat- interference-free reading with each measurement. -
Page 3: The Advantages Of Medel Mp7 Quick Instant
Gentle and Easy to Use • Special ergonomic design enables simple and easy use of the thermometer. • The MEDEL MP7 QUICK instant infrared thermometer can be used without interference to daily lifestyle. A measurement can be taken even while a child is sleeping. -
Page 4: Important Safety Instructions
• Always use the thermometer with a new undamaged probe cover for each measurement to prevent infection. Use only MEDEL original probe covers. Do not use broken or dirty probe covers. • Never immerse the MEDEL MP7 QUICK instant infrared thermo- meter into water or other liquids (not waterproof). -
Page 5: Product Description
(4) LCD Display (5) O/I button Pic. 1 (6) Battery Cover 4. HOW THE MEDEL MP7 QUICK INSTANT INFRARED THERMOMETER MEASURES TEMPERATURE The MEDEL MP7 QUICK instant infrared thermometer measures infrared energy radiated from the eardrum and the surrounding tissue. This energy is collected through the lens and converted to a temperature value. -
Page 6: Control Displays And Symbols
5. CONTROL DISPLAYS AND SYMBOLS Description Display LCD Display Meaning Press the O/I button to All segments run on the unit, all displayed segments will be shown for 2 seconds. The last reading will be shown on the Memory display automatically for 2 seconds. -
Page 7: How To Reload A New Probe Cover
6. HOW TO RELOAD A NEW PROBE COVER Pic. 2 Pic. 3 Completely push the probe into Place a probe cover onto the the probe cover holder hole storage case hole with paper (Pic.3). side upwards (Pic.2). Pic. 4 Pic. 5 Take the unit, vertically After feeling a slight click, take penetrate the probe into the... -
Page 8: Directions For Use
7. DIRECTIONS FOR USE IMPORTANT: Prior to every measurement, fit a new undamaged probe cover on the measuring probe. Failure to do so or use of a dirty, damaged or unfitted probe cover may result in incorrect temperature measurement. 1. Press the O/I button. The LCD is activated to show all segments for 2 seconds. -
Page 9: Changing From Fahrenheit To Celsius And Vice-Versa
8. CHANGING FROM FAHRENHEIT TO CELSIUS AND VICE-VERSA The MEDEL MP7 QUICK instant infrared thermometer can display temperature measurements in either Fahrenheit or Celsius. To switch the display between °C and °F, simply turn OFF the unit , press and hold the Start button for 5 seconds. -
Page 10: Error Messages
9. ERROR MESSAGES Display Possible cause and Display / Meaning fault remedy Problem Measured Displays „H“ when Temperature too high measured temperature higher than 100.0 °C or 199.9 °F. Measured Displays „L“ when temperature too low measured temperature lower than 0 °C or 32.0 °F. -
Page 11: Cleaning And Storage
Display / Display Possible cause and Problem Meaning fault remedy Blank display Please check if the battery has been loaded correctly. Also check polarity (<+> and <->) of batteries. Dead battery If the steady battery indication icon is the only symbol shown on the display, the batteries should be replaced... -
Page 12: Replacing The Battery
11. REPLACING THE BATTERY The MEDEL MP7 QUICK instant infrared thernometer is supplied with one lithium battery, type CR2032. Replace with a new CR2032 battery when the flashing battery symbol appears on the LCD display. Remove the battery cover and replace CR2032 battery (Pic.11). - Page 13 a. The unit is turned ON and ready for the Accoustic: measurement: 1 short „bi“ sound. b. Complete the measurement: 1 long beep sound. c. System error or malfunction: 3 short „bi“ sounds. Memory: Auto-Display the last measured temperature Nite Glow: a.
-
Page 14: Warranty
0044 Fabbricante/ Manufacturer: ML ASIA Ltd. www.medel.it Distributore/Distributor: Medel S.p.A. • Via Micheli, 7 - 43056 S.Polo di Torrile (PR) Italy Tel. 0521.315211 - Fax 0521.315212 - E-mail: info@medel.it...
Need help?
Do you have a question about the MP7 Quick and is the answer not in the manual?
Questions and answers