Download
Share
Print this page
  1. Manuals
  2. Brands
  3. DAS Manuals
  4. Keypad
  5. Smart DL-250
  6. Operator's manual

DAS Smart DL-250 Operator's Manual

Alpha numeric codepad
Hide thumbs

Advertisement

Quick Links

Download this manual
Alpha Numeric
Codepad
Operator's Manual
20

Advertisement

loading

Related Manuals for DAS Smart DL-250

Summary of Contents for DAS Smart DL-250

  • Page 1 Alpha Numeric Codepad Operator's Manual...

  • Page 2: Table Of Contents

    DAS LCD ALPHA NUMERIC CODEPAD Table of Contents 1. LCD Codepad Diagram ....2 2. Introduction ......3 3.
  • Page 3 CODEPAD DIAGRAM...

  • Page 4: Introduction

    Alpha Numeric Codepad was carefully designed and manufactured with excellence in performance, and long term reliability in mind. When you see the name DAS, you can be assured that this codepad has past the most demanding quality and performance standards in the industry.
  • Page 5 UNDERSTANDING YOUR ALPHA NUMERIC CODEPAD To Arm the security system, close all of the protected doors and windows. The green "SECURE" light on the codepad control will be illuminated when all of the protected zones and sensors are secure and the LCD screen will display the following message: SYSTEM READY TYPE CODE TO ARM...
  • Page 6 If the green "SECURE" light on your codepad is not illuminated, the screen on your LCD codepad will display the following message: SYSTEM NOT READY TYPE A FOR HELP When the message above is displayed, press the [A] button on the codepad and the LCD screen will display a message similar to the one below indicating which zones are not ready to Arm.
  • Page 7 When you Arm your system with the previous messages showing the system is "READY TO ARM" with "ZONES ISOLATED", the LCD screen will then alternate between the following two screens: SYSTEM ARMED 05 ZONES ISOL TYPE A FOR HELP Once zones are isolated, any sensors in those zones can be violated without affecting the status of your security system.
  • Page 8 When the message below appears on the screen of your LCD codepad, it is an indication that the telephone line that your security system depends on for reporting alarms is not functioning, and therefore cannot report alarms to the monitoring station. PHONE TROUBLE When the message below appears on the screen of your LCD codepad, it is an indication that an alarm has previously occurred.

  • Page 9: Changing User Codes

    message below appears, it is an indication that at least one of these wireless points is experiencing one or more of the following conditions: has been faulted, has been tampered with, has a low battery, has lost contact with the security control.
  • Page 10 This process is now complete, and the code of 5-5-5-5 is a valid arm/disarm code identified by the system as User #05. NOTE: If your system is the Smart DL-250 or the DL-300, code changes can be authorized by using the old code in lieu of the Master code. This allows users to change their own code without knowledge of the Master Code.

  • Page 11: Special Function Keys

    SPECIAL FUNCTIONS KEYS The following section describes some special functions that can be performed with the DAS LCD codepad. With the more powerful and versatile DAS codepad, some of these functions are accessed with the four special function keys on the left side of the number keys.

  • Page 12: Viewing The Custom Zone Descriptions

    [#] button. PARTITIONED SYSTEMS OPERATION If your system is a Smart DL-250 or the DL-300, you may have a multi-partitioned system. If your codepad resides in one partition of a multi-partitioned system, your codepad will provide the status of the zones in your partition using the screen messages described earlier in this manual.

  • Page 13: Viewing The Internal Log

    If your system is the Smart DL-250 or the DL-300, it has an internal clock that is used for various functions that your security system may need to perform. Therefore, it is important to have this clock set to the correct time and date. To set the clock, follow the procedure below.
  • Page 14 CLEARING THE ALARM MEMORY If your system is a Smart DL-250 or the DL-300, it will retain the last 12 alarm events in the Alarm Memory. To clear the Alarm Memory, follow the procedure below. Press: and the screen will display:...

  • Page 15: Master Mode Operation

    MASTER MODE OPERATION The Master Mode is used for applications where the user needs access to more than one partition(area). With an LCD codepad in the Master Mode, users will have the ability to share one codepad for a multi-partitioned system. In this mode, users can easily Arm/Disarm multiple Areas, perform the different 2-button emergency activations ( Panic, Fire, &...
  • Page 16 In the Master Mode, the message displayed below means that all Areas are secure and READY TO ARM. At this time, the green SECURE LED should be illuminated. SYSTEM READY TYPE CODE TO ARM In the Master Mode, the message displayed below means that AREAS 1, 2, 3, and 4, are ARMED.
  • Page 17 though it resides in AREA #1. The codepad LED's and LCD messages would now pertain only to AREA #1. NOTE: You can exit the "CHECK" mode by pressing [C] [A]. At this time, the codepad sounder and LED's will refer to Area #2 only.
  • Page 18 FOR SERVICE CONTACT BLANK INSIDE FRONT COVER...

This manual is also suitable for:

Smart dl-300