Download Print this page

Harbor Freight Tools 94030 Assembly And Operating Instructions

Imitation security camera

IMITATION SECURITY

CAMERA

94030

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

2005 by Harbor Freight Tools

manual or any artwork contained herein may be reproduced in any shape or

form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Table of Contents

Need help?

Do you have a question about the 94030 and is the answer not in the manual?

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Page 2: Specifications
Maintain with care. Keep the Imitation Security Camera clean for better and safer performance. Stay alert. Watch what you are doing, use common sense. Do not install the Imitation Security Camera when you are tired. SKU 94030 For technical questions, please call 1-800-444-3353 Page 2...
Page 3 Unpacking When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. SKU 94030...
Page 4 The unit will then return to a standby mode until movement is detected. Note: Installing and changing batteries are covered on page 5 under “Maintenance”. FIGURE 2 Movement Track Switch SKU 94030 For technical questions, please call 1-800-444-3353 Page 4...
Page 5 Replace with fresh AA batteries making sure that the polarities (+ or -) of the batteries line up with the polarity signs as shown in FIGURE 3, below. Replace the cover. FIGURE 3 SKU 94030 For technical questions, please call 1-800-444-3353 Page 5...