Advertisement
Quick Links
Advanced Visual Solutions Ltd
Unit 2, Eastman Way
Hemel Hempstead, Hertfordshire HP2 7DU
Telephone : ( 01442 ) 252280
Fax : ( 01442 ) 244578
Email : avsl@globalnet.co.uk : Website : avsl.com
Model :-
CPS03 & CPS03A
6 Watt Public Address
Powered Loudspeaker
Ceiling Tile Mount
Installation and Operating
Instructions
th
DOCUMENT NUMBER AVS/CPS03/OEM/01
REV 4.0
11
October 2007
Advertisement
Related Manuals for Advanced Visual Solutions CPS03
Summary of Contents for Advanced Visual Solutions CPS03
- Page 1 Advanced Visual Solutions Ltd Unit 2, Eastman Way Hemel Hempstead, Hertfordshire HP2 7DU Telephone : ( 01442 ) 252280 Fax : ( 01442 ) 244578 Email : avsl@globalnet.co.uk : Website : avsl.com Model :- CPS03 & CPS03A 6 Watt Public Address...
- Page 2 CPS03 & CPS03A POWERED LOUDSPEAKER The CPS03 series is designed to mount directly into a 209mm circular aperture in a ceiling tile or dry wall, and will operate directly from the ADPRO Colour and Audio transmission systems. It is supplied complete with an aluminium fire-check dome which must be installed with the unit.
-
Page 3: Installation
IMPORTANT NOTE! The screen or drain-wire must be earthed at the SOURCE EQUIPMENT end and MUST be connected to the connector marked “SCREEN” in the CPS03 unit when using single- ended configuration. The power supply unit supplied has a floating 0 Volt line and should only be replaced with a similar type. -
Page 4: Connection Details
AUXILIARY THROUGH (HOT) IN (From AVSM2 Microphone) IN (C) AUXILIARY THROUGH (COLD) IN (From AVSM2 Microphone) +VIN 12V DC POSITIVE SUPPLY INPUT 12V DC 0V SUPPLY INPUT LSP+ TO LOUDSPEAKER (HOT) LSP- TO LOUDSPEAKER (COLD) DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 4 of 12... - Page 5 BASIC CONNECTION DETAILS : CPS03A POWERED LOUDSPEAKER PCB Connection to an UNBALANCED Source REMEMBER TO LINK THE SCREEN TERMINAL OF THE AMPLIFIER MODULE TO THE INPUT(C) TERMINAL FOR UNBALANCED USE. DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 5 of 12...
- Page 6 BASIC CONNECTION DETAILS : CPS03A POWERED LOUDSPEAKER PCB Connection to a BALANCED Source REMEMBER TO USE A SCREENED, TWISTED PAIR, OR A SCREENED 2-CORE MICROPHONE CABLE FOR BALANCED USE. DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 6 of 12...
- Page 7 BASIC CONNECTION DETAILS : CPS03A POWERED LOUDSPEAKER PCB DIRECT CONNECTION TO ADPRO REMOTE A/V TRANSMITTER REMEMBER TO LINK THE SCREEN TERMINAL OF THE AMPLIFIER MODULE TO THE INPUT (C) TERMINAL FOR UNBALANCED USE. DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 7 of 12...
- Page 8 POWERED LOUDSPEAKER AND AVS MICROPHONE COMBINATION DIRECT CONNECTION TO ADPRO REMOTE A/V TRANSMITTER DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 8 of 12...
- Page 9 POWERED LOUDSPEAKER AND AVS MICROPHONE COMBINATION CONNECTION TO ADPRO TRANSMITTER VIA AVS BINREL02 SEE DIAGRAM ON FOLLOWING PAGE FOR DETAIL OF ADPRO CONNECTION TO BINREL02 DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 9 of 12...
- Page 10 POWERED LOUDSPEAKER AND AVS MICROPHONE COMBINATION CONNECTION TO ADPRO TRANSMITTER VIA AVS BINREL02 DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 10 of 12...
-
Page 11: Specifications
Semiconductors ESD Protected Balanced line input by quality audio transformer (“A” suffix models) Switchable Input Sensitivity ( Low/High Jumper ) On-Board Volume Control Easi-Fit Clips ( Ceiling mount version only ) DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 11 of 12... - Page 12 Ensure that there no short-circuits on loudspeaker cables before connecting to the amplifier. An ALWAYS amplifier running into a short circuit won’t last long! ALWAYS Ensure that loudspeakers are in-phase (i.e. observe polarity) for maximum efficiency. DOCUMENT NUMBER AVS/CPS03/OEM/01 REV 4.0 October 2007 Page 12 of 12...
Need help?
Do you have a question about the CPS03 and is the answer not in the manual?
Questions and answers