Table of Contents
Advertisement
to a maximum of two devices at a
time.
To pair and connect the headset to
your device if the device supports NFC,
make sure the headset is off and NFC
is activated in the device, and touch
the NFC area of the device with the
NFC area of the headset.
To pair and connect the headset to
your device if the device does not
support NFC:
1. Make sure your mobile device is
switched on and the headset is off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The headset
enters pairing mode, and the blue
indicator light starts to flash
quickly.
If the headset has been previously
paired with a device, make sure the
headset is switched off, and press
and hold the multifunction key for
about 5 seconds until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
Bluetooth on your device, and set it
to search for Bluetooth devices. For
details, see the user guide of your
mobile device.
4. Select the headset from the list of
found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to at
least one device and is ready for use,
the blue indicator light flashes slowly.
To manually connect the last used
device, press and hold the
multifunction key for about 2 seconds
(when no other device is connected),
ENGLISH
Advertisement
Table of Contents
