Thank you for choosing Bowers & Wilkins. will be influenced by several criteria, some of which may have a degree of conflict. The DS3 has the We are confident that you will enjoy many years of advantage of offering a choice of both monopole and...
the speaker, which points towards the positive lobe. Stick 4 of the clear self-adhesive rubber pads to the (figure 5) rear panel of each speaker, one close to each of the small bumps in the corners. These stop the speaker To optimise the smoothness of sounds panning from vibrating against the surface and help keep it in the front of the room to the back and vice versa when...
Fonctionnement If the equipment is being used outside the country of purchase, you should contact the B&W national La DS3 est spécifiquement conçue comme enceinte distributor in the country of residence who will murale Surround, pour les applications audio advise where the equipment can be serviced. You multicanal et les installations Home Cinema.
Page 7
Technical Features Nautilus™ tweeter Woven Kevlar ® brand fibre cone bass/midrange Description 2-way closed-box selectable dipole/monopole surround system Drive units 1x ø25mm (1 in) aluminium dome high-frequency 2x ø80mm (3 in) midrange/high frequency 1x ø130mm (5 in) woven Kevlar ® cone bass/midrange Frequency range -6dB at 63Hz and 42kHz (monopole mode)
Need help?
Do you have a question about the DS3 and is the answer not in the manual?
Questions and answers