Advertisement
Quick Links
SP 170-I (12 in.) & SP- 170T (30lb.)
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT
READING
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
World's Leader in Welding and Cutting Products
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
RETURN TO MAIN MENU
For use with machine Code Numbers 10337 and above.
THIS
SUPPLEMENTAL OPERATOR'S MANUAL
• Sales and Service through Subsidiaries and Distributors Worldwide •
IM537-SA
Supplement A for IM537-[ ]
Supplement A for IM591-[ ]
Premier Manufacturer of Industrial Motors
February, 1999
Advertisement
Related Manuals for Lincoln Electric SP 170-I
Summary of Contents for Lincoln Electric SP 170-I
- Page 1 SP 170-I (12 in.) & SP- 170T (30lb.) For use with machine Code Numbers 10337 and above. Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ...
- Page 2 (See below) Depth Weight 19.7 in. 59 lbs. 500 mm. 26.8 kg. SP 170-I (12 IN.) AND SP-170T (30 LB.)
- Page 3 Changed figures: Refers to Figure B.2a and B.3a Changed text in right column:The welder is shipped from the factory ready to feed 12" (305mm.) diameter spools with 4" (102 mm.) maximum width. These spools fit on a 2" (51 mm.) diameter spindle that has a built in friction brake to prevent overrun of the spool and excess slack in the wire.
-
Page 4: Friction Brake Adjustment
Item 5 Procedure sheet replaced by PAGE P-259-D.1 or P297-D.1 Item 6 Center panel (SP-170T) replaced by Item 6 Center panel (SP 170-I) replaced by Items 9-17 Spindle components replaced by The following items are not illustrated: New item 23 Spindle support... - Page 5 PARTS LIST FOR 30 LB. SPINDLE 5-1-97 SP 170-I (12 IN.) AND SP-170T (30 LB.)
-
Page 6: Wiring Diagram
WIRING DIAGRAM SP 170-I (12 IN.) AND SP-170T (30 LB.) - Page 7 WIRING DIAGRAM SP 170-I (12 IN.) AND SP-170T (30 LB.)
- Page 8 NOTES...