ROBOT MOWER USER MANUAL Please read this manual carefully before use ROHS Please keep this manual for future reference...
Page 2
Thank you for purchasing our product. We know that you will enjoy the extra free time you will have while using our robot lawn mower to mow your lawn. You will be impressed with your lawn's appearance and vest of all, 2000series did it for you.
CONTENTS 1. INTRODUCTION AND SAFETY······················································P1 1.1Introduction P1 1.2Symbols on 2000series P2 1.3 Symbols in the User Manual P4 1.4 Safety instructions P5 2. PRESENTATION··········································································P7 2.1 What's in box P7 2.2 Function of 2000series P9 2.3 Technical date P12 2.4 Working route P14 3.
The lawn mower may be used only by those who know how to operate it after reading and understanding the instructions in this manual. 7 8 9 Model: 2000 series (L2700, L2800, L2900 named 2000series) CE, RoHS approved. The following pages contain important safety and operating instructions.
Page 5
1.INTRODUCTION AND SAFETY 1.INTRODUCTION AND SAFETY 3. Specifications symbol 1.3 Symbols in the User Manual Taizhou Tianchen Intelligence &Electrics Co,Ltd Taizhou Tianchen Intelligence &Electrics Co,Ltd Taizhou Tianchen Intelligence &Electrics Co,Ltd These symbols can be found in this owner/operating manual. Study them Product name: Robot lawn mower Product name: Robot lawn mower Product name: Robot lawn mower...
1.INTRODUCTION AND SAFETY 1.INTRODUCTION AND SAFETY 1.4 Safety instructions - Use heavy gloves when inspecting or servicing the blades. - Read the owners/operation manual carefully and follow all the safety - Wear eye protection and use gloves when installing the virtual wire and and warning instructions.
2. PRESENTATION 2. PRESENTATION 2. Presentation Clamshell: Charging light Open it to adjust cutting height. Red: charging Green: full charged / idle. This chapter contains information you should be aware of when planning Adjusting knob: the instalation. Power terminal Screw it to adjust cutting height. Virtual wire terminal Fuse 2.1 What's in box...
2. PRESENTATION 2. PRESENTATION - Mowing schedule 2.2 Function of 2000series Set up one week (From Monday to Sunday, once for each day) cutting - Lift sensor schedule from control panel. The mower is on auto pattern when in There are lift sensors located on each omni-directional wheel. If the schedule functioned, if it feels is powerless, it will go back to charging mower was lifted 2cm from the ground in level way, it will stop working station for recharge automatically, and it will goes on cutting after it...
The robot lawn mower can't operate without a virtual wire. (we suggest to use 100m-300m of virtual wire). It leads the mower back to charging Model L2700 L2800 L2900 station and the mower will take it as a wall when it is operating. It will get...
2. PRESENTATION 2. PRESENTATION Model L2900 2.4 Working route L2700 L2800 Manual pattern Battery Mower's running path by user's willingness. Lithium battery Lithium battery Lead-acid battery Type of battery battery 7.2Ah 7.2Ah 10Ah Auto pattern 3-4hours 5-6hours 3-4hours Cutting route when Line is turned on.
3. INSTALLATION 3. INSTALLATION How to adjust the cutting height: 3. Installation This chapter describes how you install this mower. Before starting the installation read the previous chapter 2. Presentation. 1.Press the clamshell and open Read the whole of this chapter too before starting the installation. How the installation is made also affects how well the mower will work.
3. INSTALLATION 3. INSTALLATION 3.3 Charging station installation - Choose best installation place, please make sure which is flat, no water, Virtual wire - Lay virtual wire in the middle of no magnetic interference and no obstacle in the front of charging charging station.
3. INSTALLATION 3. INSTALLATION 3.4 Virtual wire installation - A minimum distances of front charging station and obstacle is 2 meters. And make sure the distance from corner to front of charging station is at The virtual wire can be installed in one of the following ways: least 2.5 meters.
Page 14
3. INSTALLATION 3. INSTALLATION - The wires leading to the island and - If a high obstacle, for example a wall or fence, borders the working area, returning from it should be parallel the virtual wire should be laid at least 50cm from the obstacle. This will and touding.
Page 15
3. INSTALLATION 3. INSTALLATION - How to set virtual wire on the ground which has swimming pool. - Care must be taken not to create a corner sharper shorter than 90 degrees when setting up virtual wire. A corner sharper less than 90 degrees can cause the mower to lose track of virtual wire.
3. INSTALLATION 4. CONTROL PANEL AND REMOTE CONTROL 3.5 Virtual wire and charging 4. Control panel and Remote control station connecting 4.1 Control Panel view - Connect two ends of virtual wire to patch jack (virtual wire terminal located on charging station) randomly, there is no positive and negative.
5. USE 4. CONTROL PANEL AND REMOTE CONTROL Power switch: Power on/ Power off 5. Use IMPORTANT INFORMATION Up / + : there are tree functions for this button. Operation with Auto Pattern -select menu, go upward - Do not leave the machine to operate unattended if you know that there -select menu, go left are pets, children or people in the vicinity -Select figure, means +...
5. USE 5. USE blades and bolts in sets to preserve balance. 4. Set ADDRESS firstly, otherwise the mower can not be turn on. - On multi-spindle appliances, take care as rotating one blade can See 5.9 ADDRESS Setting. cause other blades to rotate 5.
5. USE 5. USE WAVE 5.6 Operation pattern 1 6°C LINE There are two operation patterns: AUTO Auto MANUAL Auto pattern, Manual pattern. RAIN 1 2/14 13 : 3 1 WAVE LINE Manual 1 8°C RAIN - On Auto pattern, WAVE, LINE, RAIN shows month AUTO as picture.
5. USE 5. USE 4. To set Hour and Minute. - Press the key to confirm it, the 1 6°C 1 6°C 1 6°C 1 6°C - Press to scroll the correct 16°C 16°C arrow moves on to the next position. SET PASSWORD CLOCK CLOCK...
5. USE 5. USE 5.10 Working schedule setting 6. To set End time. There are 7 options, MON, TUE, WED, THU, End = End Time 1 6°C 1 6°C 1 6°C 1 6°C FIR, SAT, SUN. To set Hour and Minute. 08: 10 10:__ (Take 10:10 for example)
5. USE 5. USE 5.12 OTHER setting Setting steps: 1 6°C 1 6°C 1 6°C 1 6°C 1 6°C 1 6°C 1 6°C 1 6°C Enter OTHER menu there are 5 options, - Select OTHER and press to enter it. OTHER OTHER WAVE, LINE, RAIN, CODE, EXIT.
Page 23
5. USE 5. USE 4.CODE It’s about password setting. 1 6°C 1 6°C 1 6°C 1 6°C CODE: ON, every time the mower starts, OTHER TOUCH user has to enter password. - Select TOUCH and press to enter it. EXIT CODE: OFF, user does not need to enter 1 2/ 14 1 3: 54...
5. USE 6. MAINTENANCE AND STORAGE 6. Maintenance and storage 5.13 Recharging - During maintenance operations, use the individual protections indicated Recharge Voltage:24V (Lead-acid battery) / 29.4V(Lithium battery) by the Manufacturer , especially when intervening on the blade. Recharge current: 2A - Before performing maintenance operations, make sure that the robot - The mower could goes back to recharging automatically if it is power has stopped in safety conditions.
6. MAINTENANCE AND STORAGE 6. MAINTENANCE AND STORAGE 3.Clean all the outside surfaces of the robot with a spong soaked in 6.2 Robot Storage warm water. Packed the mower and all spareparts with the original package, and storage the carton off the ground in a cool, dry place. Temperature should 4.Do not use solvents or benzene so not to damage the varnished not be colder than -4F°(-20℃) surfaces and the plastic components.
6. MAINTENANCE AND STORAGE 7. TROUBLE SHOOTING 7. Trouble shooting 6.5 Battery The battery is maintenance-free, but has a limited life span of 1-3years. Display Solutions Problem Possible reasons Battery life is dependent on the length of the using season and how many hours per week the robot is used.
Page 27
7. TROUBLE SHOOTING 7. TROUBLE SHOOTING Display Solutions Problem Display Possible reasons Solutions Problem Possible reasons Mower stop 1. Strike bump 1. Restart the 1 7°C Mower is lifted Put the mower in Mower stop 16°C ALAM working and sensors times mower ALAM...
Page 28
7. TROUBLE SHOOTING 7. TROUBLE SHOOTING Problem Display Solutions Possible reasons Display Solutions Problem Possible reasons Fill in all holes, Mower reached Height Terrain needs Confirm the cover or exclude the charging landscaping difference ground before all exposed station when its between the repairs.
7. TROUBLE SHOOTING 8. EXPLODED VIEW 8.1 Charging Station Exploded View Display Solutions Problem Possible reasons The robot is very 4. Damaged 4. Get the motor noisy running motor repaired or Grass too high replaced by service station 5. Increase the cutting height or use a normal lawn mower.