Related Manuals for Taizhou Tianchen Intelligence & Electrics S520
Summary of Contents for Taizhou Tianchen Intelligence & Electrics S520
-
Page 1: User Manual
USER MANUAL Please read this manual carefully before use ROHS Please keep this manual for future reference... -
Page 3: Table Of Contents
CONTENTS 1. INTRODUCTION AND SAFETY 2. PRESENTATION 3. INSTALLATION 4. CONTROL PANEL AND REMOTE CONTROL 5. USE 6. MAINTENANCE AND STORAGE 7.TROUBLE SHOOTING 8. EXPLODED VIEW... -
Page 4: Introduction And Safety
IMPORTANT INFORMATION 3. Specifications symbol Read through the Operators Manual Zhejiang Tianchen Intelligence & Technology Co., Ltd Zhejiang Tianchen Intelligence & Technology Co., Ltd carefully and understand the content before Taizhou Tianchen Intelligence &Electrics Co,Ltd Product name: Robot lawn mower... -
Page 5: Important Information
1. INTRODUCTION AND SAFETY - Inspect and clear the mowing area of all debris (toys, 4. Charging station symbol. tree branches, items of clothing, anything with a height less than 6cm) before operating the mower. CAUTION! - Never raise the mower or attempt to inspect the blades while the mower is operating. -
Page 6: Presentation
2. PRESENTATION 2. PRESENTATION This chapter contains information you should be aware of before placing the installation. 2.1 What’s in box Clamshell: Charging light Stakes (4pcs): Open it to adjust cutting height Red: charging Used to fix the charging station to or turn on the power button. - Page 7 2. PRESENTATION 2.2 Function of S520 - Two cutting modes There are two cutting modes of the mower, go straight - Lift sensor and go circle (high efficiency). There are lift sensors located between the top and middle In Auto, mower selects cutting mode intelligently.
- Page 8 2. PRESENTATION 2.3 Technical date Model No. S520 Battery Type of battery Lithium Mower technical date Battery capacity Gross weight 22KGS 6.6Ah ≤3hours Net weight 19KGS Charging time Mower size Average working time 2-3hours 60.5*46.5*28cm (LWH) Functions: Rated power ≤60db...
-
Page 9: Installation
3. INSTALLATION 3. INSTALLATION 3.3 Charging station installation This chapter describes how you to install this mower. - Choose best installation place, please make sure Before starting the installation, read the previous it is flat, no water, no magnetic interference and no chapter 2. - Page 10 3. INSTALLATION - Bury virtual wire below grass and fasten it on 3.4 Virtual wire installation the ground with pegs, so that the mower should The virtual wire can be installed in one of the following not cut the wire. ways: Add pegs in order to pull the - Securing the wire to the ground with pegs.
- Page 11 3. INSTALLATION - Use the virtual wire to isolate areas inside the working - Care must be taken not to create a corner sharper area by creating islands around obstacles that can shorter than 90 degrees when setting up virtual wire. not withstand a collision, for example, flower beds and A corner sharper less than 90...
- Page 12 3. INSTALLATION 3.5 Charging head installation. 3.7 Power connection. 1. Connect charger terminal with charging station power terminal . Connect 1 from plug a to 1 from plug b and screw it it tightly. Power terminal Power terminal on charger on charging station Please fasten the charging heads on the charging 2.
-
Page 13: Control Panel And Remote Control
4. CONTROL PANEL AND REMOTE CONTROL 4.2 Remote control 4. CONTROL PANEL AND REMOTE CONTROL 4.1 Control Panel view Indicator light. ON/OFF button: To stop the mower. Press it, mower enters standby mode. Speed up. Turn right. Speed down. Enter MANUAL pattern Turn on or turn off the cutting blade. -
Page 14: Use
5. USE 5. USE 5.2 Starting the mower IMPORTANT INFORMATION There are two locations of start the mower. 1.Take the mower clockwise onto virtual wire, make sure - Do not leave the mower to operate unattended if you that the mower is not connected with two charging know that there are pets, children or people in the sheets on charging station. - Page 15 5. USE Year Week Month / Date SYSTEM TIME Hour / Minute SAVE / EXIT TIME MON,TUE,WED,THU,FRI,SAT,SUN, EXIT SCHEDULE TIME START TIME AREA 1 AREA 2 AREA 3 SAVE / DEL / EXIT 00:00 000 MIN 000 MIN 000 MIN EXIT Robot mower...
- Page 16 . 10minutes for each scrolling.(From 000 to 250minutes). 2. Select ADDRESS and enter it by pressing key 6. Set AREA 2 and AREA 3 as Step5. Zhejiang Tianchen Intelligence & Technology Co., Ltd 3. Input the Address Code Product name: Robot lawn mower...
- Page 17 5. USE 5.10 Language selection - Route the wire around the passage to separate the area. The virtual wire to and from the edge of passage is 1meter 1. Select SET and enter it by pressing key at least. check the setting as below picture. 2.
-
Page 18: Maintenance And Storage
Blade 6.3 Blade replacement Every week If the blade is bent due See “Blade Blade model: S520 to an impact or if it is replacement” worn-out, replace it. Blade replace steps: 1.Stop the robot in safety conditions. See “Robot... -
Page 19: Trouble Shooting
7.TROUBLE SHOOTING 7. TROUBLE SHOOTING Display Possible reasons Solutions Problem 1.Check the virtual wire After enter the correct 1.The virtual wire fails to send signals. password and select light on charging station. Be sure the virtual wire is AUTO mode, but the connected to the charging 2.The virtual wire was mower still can not start. - Page 20 7.TROUBLE SHOOTING Display Possible reasons Solutions Problem Turn off the mower and take Mower is tilted over than Mower stops working 30 degrees from the the mower to level ground. and beeping. ground. Then restart the mower. 1. The battery is low. 1.
-
Page 21: Exploded View
8. EXPLODED VIEW Robot Exploded View - 18 -... - Page 22 8. EXPLODED VIEW Robot spareparts list: Sparepart Name Spareparts Name Spareparts Name Rotating knob Front wheel Top cover Cutting motor fixing seat Brushless motor PCB Clip Spring lock Main PCB Clamshell Cutting motor base USB connector Axle for clamshell Rubber ring Rocking bar rubber Clamshell fixed block Gasket for rubber ring...
- Page 24 Robot lawn mower USER MANUAL...