Related Manuals for Sensoray 611
Summary of Contents for Sensoray 611
- Page 1 SENSORAY CO., INC. PCI Frame Grabber Model 611 (Rev.D) July 2001 © Sensoray 2001 7313 SW Tech Center Dr. Tigard, OR 97223 Phone 503.684.8073 • Fax 503.684.8164 sales@sensoray.com www.sensoray.com...
- Page 2 T able of Contents LIMITED WARRANTY ....................3 SPECIAL HANDLING INSTRUCTIONS................4 INTRODUCTION ......................4 SYSTEM REQUIREMENTS ....................4 SPECIFICATIONS ......................5 Connectors ......................6...
-
Page 3: Limited Warranty
The reader should consult Sensoray if errors are suspected. In no event shall Sensoray be liable for any damages arising out of or related to this document or the information contained in it. -
Page 4: System Requirements
System Requirements The 611 is designed to work with 32-bit, 33 MHz, 5 V PCI bus. An important system requirement is fast PCI-to-DRAM transfer. Some systems may not provide bandwidth sufficient for image transfer,... -
Page 5: Specifications
Specifications Video sources NTSC, PAL, SECAM, RS-170, CCIR Video inputs 4 analog composite video; 1 analog Y/C (S-video) Output formats RGB (15, 16, 24, 32 bits/pixel), Y8 (8 bits/pixel), YCrCb (16 bits/pixel) Output resolution (max), pixels 754x480 (NTSC, RS-170), 922x576 (PAL, SECAM, CCIR) A/D resolution: luminance channel 8 bit... - Page 6 Connectors Video inputs: Composite video 1 Composite video 2 Composite video 3 Composite video 4 S-video (Y/C) Notes: 1. Composite video 4 and S-video inputs share the same physical line. Do not connect video sources to both at the same time.
- Page 7 GPIO connector (J5) Signal Signal Ground GPINT GPO2 GPO3 GPO0 GPO1 GPI2 GPI3 GPI0 GPI1 Notes: 1. GPO0-GPO3 – CMOS outputs. 2. GPI1-CPI3 – CMOS inputs. 3. GPINT – general purpose interrupt pin.
Need help?
Do you have a question about the 611 and is the answer not in the manual?
Questions and answers