Mitsubishi DY-1MU3R45-T Service Manual page 10

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1. Lock connector after inserting M002 to the connector of S2-DY follow below indicates,
then insert revers side to M002 and look the connector.
(Follow the indicates in view on right.)
2. Screw M017 and S2-DY with Ⓒ. (4 places)
3. Stick M010 on M017. (Follow the indicates in view on right.)
4. Insert two tabs of M005 to the rectangle hole of S2-DY.
And fit tabs on the two sides of M005 to the S2-DY.
Screw M005 with Ⓐ. (By Ⓐ 2places)
M005 : COVER-U
M010 : SHEET-HS
M017 : CD8-MECHA
(955823)
Ⓐ x 2
Ⓒ x 4
M002 : FLAT-CABLE 18P
M002
M017.
S2-DY
M017 : CD8-MECHA
(955823)
M002(FFC) attachment detail
10
Copyright (C) Mitsubishi Electric Corporation.
DY-1MU3R45-T,-2
M010 M017
M010
M010 : SHEET-HS
No. Screw Tighten torque(N・m)
Ⓐ
3X6 0.8 +0.2/-0.1
Ⓒ
2.6X6S 0.6 +0.2/-0.1
Your company internal use only.