Viewing Remote Control - Telefunken L32H125A3 Instruction Manual

Viewing remote control

1. Standby
2. Numeric buttons
3. TV-AV / Channel List / DVB-T/C
4. Volume up/down
5. Mute
6. Navigation buttons
7. Menu on/off
8. OK / Channel List / Hold (in TXT mode)
9. Return/Back/Index page (in TXT mode)
10. Internet Portal
11. Media Browser
12. My button 1 / Youtube link (*)
13. Coloured Buttons
14. Mono-Stereo Dual I-II / Audio-Subtitle Language
15. Subtitle on-off / Subtitle (in Media Browser
mode)
16. Fast Rewind (in Media Browser mode)
17. No Function
18. Play (in Media Browser mode)
19. Stop (in Media Browser mode)
20. Pause (in Media Browser mode)
21. Fast Forward (in Media Browser mode)
22. Image size
23. Teletext / Mix
24. My button 2 (**)
- Switches to TV source if pressed on another
source
- Switches between DVB-T and DVB-C channel
lists (if available)
25. Electronic Programme Guide
26. Exit
27. Quick menu
28. Info / Reveal (in TXT mode)
29. Programme Up-Down
30. Previous programme
31. AV / Source selection
Using My button 1 (*)
This button's main function is to run Youtube link.
However, if you want to change this function, you can
press MY BUTTON 1 for five seconds when on a desired
source, channel or link, until the "MY BUTTON IS SET"
message is displayed on the screen. This confirms
that the selected MY BUTTON is now associated with
the selected function. Note that if you perform first time
NOTE: The Remote Control range is approximately
7m / 23ft.
installation, MY BUTTON 1 will return to its default
function.
Using My Button 2 (**)
This button's main function is to switch between
DVB-T, DVB-C and DVB-S broadcasts. However, if
you press MY BUTTON 2 for five seconds, you can
set a function to it as described in My Button 1.
Note that if you perform first time installation, MY
BUTTON 2 will return to its default function.
English - 35 -
SOURCE
TV
.
EXIT
BACK