Backlight - White's Spectra VX3 Owner's Manual

- Accepts most common US coins, including nickels.
• Coin
Most other VDI regions, including where most jewelry is
found, are rejected.
•
Coin & Jewelry
rings and jewelry.
• - Coin & Jewelry using salt subtraction mode.
Salt Beach
• - Mixed mode, no Tone ID, no VCO.
Relic
•
Prospecting
•
Deep Silver
• - Advanced Coin & Jewelry.
Hi-pro
• - Extra program for whatever you want. Factory set-
Demo
tings for this program are weak, intended for in-store demos.
Notice that
other programs have a "" symbol. The "" symbol means a
program has not been modified, whereas a "" symbol indicates
changes have been made. At any time you can easily restore a
program to its factory settings; this is covered in Chapter 7.
Tip: Program changes are automatically saved when VX
turned off. If you remove the battery pack instead of press-
ing the
OFF
saved.
Note that changing the Program from the Live Control Bar
is a live action and can be a little sluggish if you are trying to
scroll from Coin down to Hi-Pro. Press
non-live menu which is much faster to scroll through.

Backlight

VX uses a transflective display that has good visibility in
3
direct sunlight without the backlight. In shade or low sunlight
you may need to turn on the backlight. Backlight brightness can
be set from 1 to 20. Keep in mind that more backlight draws
Spectra VX
- Accepts most common coins, along with
- All-metal mode optimized for nugget hunting.
- Optimized for deep silver.
is preceded by a "" symbol whereas the
Coin
button, then program changes will not be
3
User's Guide
Page 3-3
to bring up the
VIEW
3 is