LG WM2277H series Training Manual page 14

INSTALL THE WASHER ON A FIRM, FLAT SURFACE.
ADJUST THE FEET TO BE LEVEL.
WM2277 WASHER
This photo shows the leveling leg with
plastic foot and locking ring. After
adjusting the foot by using the wrench
to raise or lower it. You can lock the
adjustment into place by tightening the
lock ring against the underside of the
washer.
Use a spirit level to adjust the feet to
make the washer level. You may have
to adjust more than one foot to get the
desired results. The legs must be firmly
against the floor, and the washer must
be level in all directions: front to back,
left to right, and corner to corner.
Proper leveling will minimize shaking
and vibration.
PAGE 16 of 84 TRAINING MANUAL