Control Panel - LG WM2277H series Training Manual

The control panel is located on the front of the washer. All options are available
from the control panel. (See larger drawing, page 20.)
Cycle Knob
ON/OFF button
START/PAUSE
Custom Program
Delay Wash
Wash / Rinse
Spin Speed
Soil Level
Beeper
Option Buttons
WM2277 WASHER

CONTROL PANEL

The large knob that selects the cycle. (See chart, p. 21.)
Pressing this button turns the machine ON or OFF.
Press this button to start the cycle or to pause the
washer when a cycle is in progress. The door may not
unlock in every case. (See page 8.)
Set the controls for a special cycle that you use often,
then press and hold this button to set that cycle. Then
use this button every time you wish to use your special,
custom cycle.
Set the cycle controls and then press this button up to
12 times to delay the start of the cycle for up to 12
hours.
Selects one of the wash and rinse temperature
combinations available.
Selects one of the available spin speeds between 0 (no
spin) and 1,150 rpm.
Adjusts the default washing time by ±16 minutes based
on soil level.
Adjusts the warning tone from OFF to LOUD in 5 steps.
See the chart on the next page.
PAGE 20 of 84 TRAINING MANUAL