Download Print this page

texet CC15M Instruction Manual

Cross cut shredder

Advertisement

Quick Links

SPECIFICATION
Model:
Voltage:
Current:
Paper entry width:
Shred size:
Shred paper capacity:
Shred speed:
Waste bin Volume:
Noise level:
Duty cycle:
Net weight:
Dimension:
Type designation:
Testing acc. to BSEN 60950-1:2006
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Test Standards:EN55014-1:2006
EN55014-2:1997+A1:2001
EN61000-3-2:2006
EN61000-3-3:2008
Visit www.texet.com for details on other Texet products.
CC15M
220-240VAC,50Hz
1.0A
220mm
4*20mm
6sheets 70gsm
2.5m/min
15L
74dB
2 mins on and 60mins off
3.2KGs
314*181*395mm
Instruction manual
CROSS CUT SHREDDER
CC15M
Please Read The Following Instructions Carefully before Use, and Keep It for Future Use.
http://www.texet.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the CC15M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for texet CC15M

  • Page 1 Testing acc. to BSEN 60950-1:2006 Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Test Standards:EN55014-1:2006 EN55014-2:1997+A1:2001 EN61000-3-2:2006 EN61000-3-3:2008 Visit www.texet.com for details on other Texet products. Please Read The Following Instructions Carefully before Use, and Keep It for Future Use. http://www.texet.com...
  • Page 2 Shredder Capacity: come from the shredder, Please keep soft cloths, ties away The CC15M will shred 6 sheets of A4 70g paper at once and will accept paper width up to please stop using it immediately from the paper entry.
  • Page 3 Paper is easily wrapped around the shredder head if the waste bin is The CC15M is equipped with a motor overload protection device; the normal short duty cycle allowed to get too full, therefore, please empty the waste bin when the bin is for continuous shredding a maximum capacity is 2 minutes on &...
  • Page 4 Troubles Reason Solution Shredder does not stop 1. The mechanical sensor may after 1. Clean the paper entry and try again. be jammed by paper shredding has finished Shredder 1. The shredder may not be 1. Replace the shredder onto a flat makes a high placed on a flat surface.