connect using a special cable that plugs into your phone's headset jack. If this cable was not
provided with your TTY phone, contact your TTY phone manufacturer to purchase the connector
cable.
1. From home, tap
2. Tap
Call > Additional settings > TTY mode to choose a mode, from TTY Off, TTY Full,
TTY HCO, or TTY VCO.
Hearing Aids
When enabled, your phone improves the sound quality for use with hearing aids.
1. From home, tap
2. Tap
Call > Additional settings > Hearing aids to enable or disable the option.
Ringtones and Keypad Tones
Choose tones and vibrations to play for incoming calls and keypad taps.
1. From home, tap
2. Tap
Call > Ringtones and keypad tones to configure settings:
Tap Ringtones, and then select a ringtone for incoming calls. Tap OK to save your
l
selection.
Tap Vibrations, and then select a vibration pattern to play for incoming calls when the
l
Vibrate when ringing option is enabled. You can tap Create to create a custom pattern. Tap
OK to save the settings.
Tap Vibrate when ringing to play a vibration for incoming calls. The vibration pattern is set
l
at the Vibrations setting.
Tap the checkbox beside Dialing keypad tone to enable or disable tones for keypad taps.
l
Personalize Call Sound
Choose options for call audio, in cases where you might need the sound softer or more clear, or
optimized for your right or left ear.
Note: This option is can only be configured during a call. For more details, see In-Call Options.
1. From home, tap
2. Tap
Call > Personalize call sound.
3. Tap a setting, and then configure options if available:
Settings
Apps >
Settings.
Apps >
Settings.
Apps >
Settings.
Apps >
Settings.
163