LG 25UM57 Owner's Manual page 10

10
ASSEMBLING AND PREPARING
29UM57
1
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
y y
the surface with a soft cloth.
2
Remove the screw cover.
Screw cover
3
Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Stand Hinge
Stand Body
4
Turn the screw to the left.
1
2 Pull out the Stand Base.
Stand Body
Stand Base
CAUTION
Illustrations in this document represent typi-
y y
cal procedures, so they may look different
from the actual product.
Do not carry the monitor upside down by just
y y
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
When lifting or moving the monitor, do not
y y
touch the monitor screen. Applying force or
pressure may damage the monitor screen.
Instead, hold the stand body or the plastic
frame of the product.
CAUTION
The components in the illustrations may dif-
y y
fer from the actual product.
Do not carry the monitor upside down, as this
y y
may cause it to fall off its stand and result in
damage or injury.
To avoid damaging the screen when lifting
y y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.