Maintenance Display And Operation - Canon S530D Service Manual

6.9.9. Error display
Error number is displayed in the Required Sheets line of the LCD when errors occur in the S530D.
The display clears when the errors are recovered.
Note: Details of error displays are described in the following section.
Possible key operation under the mode:
Power button:
Resume button:
Mode button:
Print button:
Resume/Cancel button:
Maintenance button:

6.10 Maintenance Display and Operation

6.10.1. Maintenance list
Maintenance No.
1
2
3
4
5
6
*Available when a memory card containing data is inserted and while there is no active connection to a
powered on digital camera.
6.10.2. Entering the maintenance mode
Pressing the Maintenance button on the operation panel moves the printer to the maintenance mode.
The printer will not enter the mode while Memory Card Direct Printing and Digital Camera Direct Printing, or
when an error is displayed in the operation panel.
6.10.3. Implementing maintenance
Pressing the Print button in the maintenance mode executes the selected maintenance operation.
When the maintenance number is 0, the operation is invalid.
When the printer starts the maintenance, the step number showing the processing level of each
maintenance is displayed to the right of the maintenance number such as '1-01'.
During maintenance implementation, the left and right cursor keys cannot be switched to other maintenance
modes.
During each step implementation, if an error occurs in the printer engine, the operation panel enters the
error display mode.
Powers off the printer.
Resets the printer (same as with the S520).
Invalid.
Error-dependent.
Error-dependent.
Invalid.
Nozzle check pattern printing
Head cleaning
Head refreshing
Head alignment
Optional CV-100 brightness adjustment* (selectable only when the CV-100 is
connected)
Optional CV-100 contrast adjustment* (selectable only when the CV-100 is connected)
Content of Maintenance
24