Removing A Headlamp - Ford 2016 Fusion Hybrid Owner's Manual

REMOVING A HEADLAMP

E159693
Note: To remove push pins, use a
flat-bladed screwdriver to pull up the center
release pin.
1. Make sure the headlamp control is in
the off position and open the hood.
2. Remove the six push pins securing the
front fascia to the front trim cover.
3. Remove the three bumper cover upper
screws using a flat-bladed screwdriver.
4. Remove the push pin at the inboard
side of the headlamp you are servicing.
E159694
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, First Printing
Maintenance
5. Remove the two screws securing the
headlamp using a flat-bladed
screwdriver.
E159695
6. Remove the lower three wheel housing
fasteners by turning them
counterclockwise.
263