Framework; Device External Cable - LINOVISION IPC-V3020-IW Quick Start Manual

1 Framework

1.1 Device External Cable

You can refer to the following figure for
Please refer to the following sheet for detailed information.
SN Port Port name
Network port
1 LAN
Power input
2 DC 12V
port
3
WPS/Reset
Reset
port
cable information. See Figure 1-
Figure 1-1 Cable
Figure 1-2 Cable
Connector Function description
Connect to standard Ethernet cable.
Ethernet
Note:
port
Some devices do not support PoE power supply.
- Power port. Input DC 12V.
WPS/Hardware reset wire
Press the WPS button of router, keep the Reset
wire short circuit for 1-2 seconds, generally the
device can be connected to corresponding router
within 1 minute.
/
Keep the Reset wire short circuit for more than 5
seconds when the device is under normal working
condition, then the system configuration
information can be restored to default setting.
（Supported by WIFI devices）
.
1