Table of Contents
Advertisement
PAL
ITEM
WIDTH
(WID)
HEIGHT
(HIT)
NTSC
WIDTH
(NWID)
HEIGHT
(NHIT)
ELECTRICAL ADJUSTMENT
ADJUSTMENT PROCEDURE
1. Select picture size WIDE mode.
2. Call up the adjustment mode display, and press the TV/VIDEO
button on the remote untill the white cross dot pattern appears on
the screen.
3. Press the CHANNEL s or t button to select the item WID and
press the VOLUME s or t button to get the pictuer so the left and
right edges of rester begin to lack.
4. Press the VOLUME s or t to advance the data 22 steps.
* CAUTION
"WID" data don't adjust other picture size, only WIDE mode.
1. Call up the adjustment mode display, then select the item HIT.
2. Press the VOLUME s or t button to get the picture so the top of
raster begins to lack.
3. Press the VOLUME s button to advance the data by following steps.
WIDE: 7 steps
Super Live:
11 steps
CINEMA:
10 steps
* CAUTION
First adjust WIDE mode next other.
Note : Check the vertical picture position is correct.
1. Select picuter size wide mode.
2. Call up the adjustment mode display, and press the TV/VIDEO
button on the remote untill the white cross dot pattern appears on
the screen.
3. Press the CHANNEL s or t button to select the item WID and
press the VOLUME s or t button to get the pictuer so the left and
right edges of rester begin to lack.
4. Press the VOLUME s or t to advance the data 16 steps.
5. Change picture size Super Live and CINEMA adjust "NWID" data
same value for WIDE mode.
1. Call up the adjustment mode display, then select the item HIT.
2. Press the VOLUME s or t button to get the picture so the top of
raster begins to lack.
3. Press the VOLUME s button to advance the data by following steps.
WIDE: 7 steps
Super Live:
13 steps
CINEMA:
10 steps
Note : Check the vertical picture position is correct.
– 14 –
Advertisement
Table of Contents
