GE XL44 Use And Care & Installation Manual page 29

How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning make sure the oven clock
shows the correct time of day.
Quick Reminder—Delay Start for Self-Clean:
1. Prepare the oven for cleaning.
2. Close and latch the oven door. If your range
does not have a latch, the door will lock
automatically.
3. Press the SELF CLEAN pad.
4. Press the + or – or number pads until the
desired Clean Time appears.
5. Press the DELAY START or START TIME pad.
6. Press the + or – or number pads until the
desired Start Time appears in the display.
7. Press the START pad.
1. Prepare the oven for cleaning.
2. Close the oven door and
slide the latch handle to
the right as far as it will
go. Make sure the oven
light is off. If your range
does not have a latch, the
door will lock automatically.
Never force the door latch handle. Forcing the
handle may damage the door lock mechanism.
3. Press the SELF CLEAN pad.
4. Press the + or – or number pads to set the
Clean Time.
5. The Clean Time is preset for 4 hours. You can
change the Clean Time to any time between 3 and
5 hours, depending on the amount of soil in your
oven. If a different Clean Time is desired, press the
+ or – or number pads until the desired Clean Time
is displayed.
6. Press the DELAY START or
START TIME pad.
7. Change the Start Time by pressing
the + or – or number pads. The words
"DELAY CLEAN" will appear in
the display.
8. Press the START pad.
The self-clean cycle will automatically begin when
the Start Time is reached. The word "ON" will appear
in the display when the self-clean cycle begins.
When the oven locks, the words "LOCKED DOOR"
will be displayed and a short time later the door will
be locked in position. It will not be possible to open
the oven door until the temperature drops below the
lock temperature.
When the clean cycle is finished, the word "CLEAN"
will go out in the display. When the oven has cooled,
the words ''LOCKED DOOR'' will go out and the
door can be opened.
9. When the LOCKED DOOR light is off, slide
the latch handle to the left as far as it will go and
open the door. If your range does not have a latch,
the door will unlock automatically.
Never force the latch handle. Wait until the
words ''LOCKED DOOR'' go out in the display.
Forcing the latch handle may damage the lock.
(continued next page)
29