Page 1
Operating Manual Panel PC EXPLORER 15i EXPLORER 18i Doc: 60000206 GECMA COMPONENTES GMBH WWW.GECMA.COM TEL. +49 2237 6996-0 FAX. -99 MANUAL EXPLORER REV 1.10 EN.DOC 13.05.08 A.J. 1 1 1 1...
Page 2
Some of the interfaces and the power supply input are increased safety and accessed via an Ex e terminal enclosure. When the Explorer 15i/18i is correctly mounted into a min. IP6X certificated housing (with a cut out of 417mm x 328,5mm resp. 16,43“x12,94“ for Explorer 15i or 476mm x 396mm resp. 18,75"x15,6“...
Page 3
328,5mm resp. 16,43“x12,94“ for Explorer 15i or 476mm x 396mm resp. 18,75"x15,6“ for Explorer 18i). The use of the device in Zone 21 are permitted, when the Explorer 15i/18i correct mounted in a min. IP6X approved housing (with a cut out of 417mm x 328,5mm resp. 16,43“x12,94“ for Explorer 15i or 476mm x 396mm resp.
The external USB-CD/DVD drive must be powered externally. The connection of a non intrinsically safe USB-CD/DVD drive (or similar) to the intrinsically safe USB interfaces X35 to X38 are not permitted. GECMA COMPONENTES GMBH WWW.GECMA.COM TEL. +49 2237 6996-0 FAX. -99 MANUAL EXPLORER REV 1.10 EN.DOC...
Page 5
“Fast PIO 2” for example. After you changed the BIOS-version (e.g. BIOS update) you have to check specially the settings of „USB EHCI Host controller” and the settings of the Transfer Mode when you use CF-cards. GECMA COMPONENTES GMBH WWW.GECMA.COM TEL. +49 2237 6996-0 FAX.
Page 16
The terminal numbers are written on terminal labels close to the appropriate the terminal. Terminal numbers that are not listed mean the appropriate option is not fitted. For further details refer the wiring diagram #30100358 or #30100399 and the Ex certificate. GECMA COMPONENTES GMBH WWW.GECMA.COM TEL. +49 2237 6996-0 FAX.
Incorrect or inadmissible application as well as non-observance of the instructions in this operating manual invalidate the warranty. Only use this device for the approved purpose. Conversions and modifications to the device are not allowed. The housing is only to be opened by the company Gecma Components GmbH. Assembly Assembly...
Repair work, hazardous material Repair work, hazardous material The description of the fault(s) should be included with the device which are returned to GeCma Components GmbH or their Agent for repair. The following measures are to be taken before sending a device in for repair: Please clean the device thoroughly and remove any residue from surfaces.