Sony DSC-RX100M3 Cyber-Shot Instruction Manual page 24

Memory recall
Memory
(Custom Settings)
Zebra
MF Assist
Focus Magnif. Time
Grid Line
Auto Review
DISP Button
Peaking Level
Peaking Color
Exposure Set. Guide
Live View Display
Pre-AF
Zoom Setting
FINDER/MONITOR
AEL w/ shutter
Self-portrait/ -timer
GB
24
Selects a setting registered in advance when the mode
dial is set to MR (Memory recall).
Registers the desired modes or camera settings.
Displays stripes to adjust brightness.
Displays an enlarged image when focusing manually.
Sets the length of time the image will be shown in an
enlarged form.
Sets a grid line display to enable alignment to a
structural outline.
Sets auto review to display the captured image after
shooting.
Sets the type of information to be displayed on the
monitor or in the viewfinder by pressing DISP on the
control wheel.
Enhances the outline of in-focus ranges with a
specific color when focusing manually.
Sets the color used for the peaking function.
Sets the guide displayed when exposure settings are
changed in the shooting screen.
Sets whether or not to reflect settings such as
exposure compensation in screen display.
Sets whether or not to perform auto focus before the
shutter button is half pressed.
Sets whether to use the Clear Image Zoom and Digital
Zoom when zooming.
Sets the method for switching between the viewfinder
and screen.
Sets whether to perform AEL when the shutter button
is half pressed. This is useful when you want to adjust
the focus and exposure separately.
Sets whether to use a 3-second delay self-timer when
the screen is tilted upward about 180 degrees.