Sony KP-57WV600 Service Manual page 51

2-13-1.ADJUSTMENT FOR
NTSC FULL MODE
• The adjustment should be done in the numerical order given.
1) GREEN ADJUSTMENT
1. Cover the red and blue CRT lenses with lens caps to allow only green
to show (or use the method shown in the note below for turning off the
CRTs individually without using lens caps).
2. Enter the monoscope signal to set.
3. Select the PJE mode.
4. Press the "6" button on the remote commander to display the internal
test signal (crosshatch).
5. Select "GRN CENT", and adjust so that the pictures coincide in the
center of screen.
Note: If lens caps are unavailable, you can cut off the unnecessary color
beams by controlling the service mode 2170P-2 1 RGBS.
GRN CENT (Horizontally/Vertically)
Push the joystick
to
Push the joystick
to
7. Select "GRN SKEW", and correct the tilt of horizontal lines and
vertical lines.
GRN SKEW (Horizontally/Vertically)
Push the joystick
to
Push the joystick
to
8. Select "GRN SIZE", and adjust so that each distance from center to
left end and to right end is equal. Adjust so that each distance from
center to top and to bottom is equal.
Push the joystick
to
Push the joystick
to
Push the joystick
to
Push the joystick
to
— 51 —
GRN SIZE (Horizontally/Vertically)
Push the joystick
to
Push the joystick
to
9. Select "GRN LIN", and adjust so that each space at the right end and
at the left end of screen is equal. Adjust so that each space at the top
and at the bottom of screen is equal.
GRN LIN (Horizontally/Vertically)
Push the joystick
to
Push the joystick
to
10. Select "GRN MSIZ", and correct the space intervals for the horizontal
section so the screen is equal.
GRN MSIZ (Horizontally)
Push the joystick
to
11. Select "GRN MLIN", and correct the sizes of the horizontal line so the
center of the screen is symmetrical left and right.
GRN MLIN (Horizontally)
Push the joystick
to
Note: The SIZE and LIN, MSIZ and MLIN adjustments
affect each other. If necessary, adjust these mutually.
KP-57WV600/57WV700/
65WV600/65WV700
Push the joystick
to
Push the joystick
to
Push the joystick
to
Push the joystick
to
Push the joystick
to
Push the joystick
to