Software Installation - Siemens M35 Series Service Manual

Software Installation

Before executing the test software, it is important to ensure that the software configuration
matches that of the hardware set up. Each GSM Tester will have a specific test software. The
test software are name CMD_GO, CTS_GO and for Wavetek test set, CAT4200 respectively.
First, copy the installation software for the specific GSM tester to a temporary directory on the
harddisk of the Window PC and then Run the Setup from the first sub directory – Disk1 for
CMD_GO test software.
After the installation for the test software, RUN the Test software and check the configuration
setting for the Serial port.