CALIBRATION
If the 6-speed gear stick (7GS) is not working
properly it might require new calibration.
Please go through the following steps:
Connect the power supply to the base
Press „start button" + „TUNING button"
at the same time
The LED display will show G_n
Bring the 7GS into neutral position
Press the „start button"
The display will now change to G_r
Enter reverse gear
Press the „start button"
The display will now change to G_1
st
Bring the 7GS into 1
gear
Press the „start button"
The display will now change to G_2
nd
Bring the 7GS into 2
Press the „start button"
The display will now change to G_3
rd
Bring the 7GS into 3
Press the „start button"
The display will now change to G_4
th
Bring the 7GS into 4
Press the „start button"
The display will now change to G_5
th
Bring the 7GS into 5
gear
gear
gear
gear
Press the „start button"
The display will now change to G_6
Bring the 7GS into 6
Press the „start button"
Calibration is completed
WHEEL CENTER CALIBRATION
If you drive straight and the wheel is slightly off-center,
you can recalibrate the wheel.
•
Move the wheel rim to the middle position.
•
Press the Start button + D-pad LEFT button at the
same time and hold both buttons.
•
Now also press the base button.
•
Release all three buttons.
23
th
gear