Topfield TRF-2400 User Reference page 94

86 Troubleshooting
• Press the
When the Service Scan is finished I get zero channels
• Make sure the antenna is plugged into the wall socket.
• Check that there is a signal coming from the antenna by
• You must have signal strength between 50%–90%
• Indoor antenna is not recommended as the signal is not
I get a pixilated image on the my Television
• Check the plug on the Toppro and on the wall making
• Check that there is a signal coming from the antenna by
• You must have signal strength between 50%–90%
Can not receive or adjust sound through Toppro unit
• Adjust volume using the
• Use the TV remote to adjust the sound to approx 50%
• Check the connection between the TV and the Toppro
• Make sure you are in the correct AV on the TV
£
¢ ¡
button on the remote and set to the correct
VF
resolution.
576i/576p/720/1080i/AUTO. You may need to press the
£
¢ ¡
button multiple times to cycle through all the differ-
VF
ent formats. All formats will be displayed on the front
screen of the Toppro.
connecting it directly to the TV or another device.
enough to display channels when a service is scanned.
sure that it's a tight connection.
connecting it directly to the TV or another device.
on the Toppro Remote.
then use the Toppro remote to adjust volume.
product.
£ £
¢ ¡ ¢
and the
VOLUME VOLUME
¡
+