Samsung 470 Installation Manual page 8

The TV stand more than 32inch supports the swivel function. The swivel angle support all of 20°, 60° and 90° and you
can change the swivel angle by using BRACKET HOLDER SWIVEL. (Except HG***C470)
¦ 20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is
marked, the swivel angle becomes each 20° ~ 60° in the left and right side.
(The shape of stand depend on the model.)
¦ 90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the
left and right side.
¦ Hotel Mount Kit (only HD670 have)
Short Bolt (2EA)
WARNING: To prevent injury, this apparatus must be securely attached to the floor/ table in accordance with
the installation instructions.
8
English
Assembling the swivel (32 inch TVs or larger)
Long Bolt (2EA) Nut (2EA)
Top
Bottom
Washer (2EA)
Affix the stand to a flat surface such as a dresser top, desk
top, or entertainment center as shown.
Bolt + Nut