Samsung 470 Installation Manual page 29

Hotel TV Function
No
Category
8 Remote Jack Pack
External Source Banner
9 External Source
10 HP Management
Bathroom Speaker
11
(HD470 not
support it)
12 Eco Solution
Edit Welcome Message
13 Logo/Message
14 Cloning
Item initial value
Priority AV
Priority PC
Priority HDMI
AV Option
HDMI Option HDMI 1
USB Pop-up Screen
Auto source
Anynet+Return Source Power On Src
HP Mode
Default HP Volume
Main Speaker
Sub Amp Mode
Sub Amp Volume
Energy saving
Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Setting Auto Intialize
Description
If the jack priority is set, the corresponding source is automatically set when
1
a jack is inserted according to the jack priority
If the jack priority is set, the corresponding source is automatically set when
2
a jack is inserted according to the jack priority.
If the jack priority is set, the corresponding source is automatically set when
3
a jack is inserted according to the jack priority.
Select RJP AV Source (Source selection depends on Model).
AV
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/
HDMI2/HDMI3)
When a USB device is connected to the TV :
• Default : A popup window appears.
Default
• Automatic : Opens the USB contents menu automatically.
• Disable : Neither the popup window nor the menu appears.
If set to On, the TV displays the External Source Banner (information) when
you change the TV source to another external input, press the Info key, or
turn the TV on.
ON
• On : The External Source information is displayed on the TV screen.
• Off : The External Source information is not displayed on the TV screen.
• On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that input
OFF
source.
• Off : Auto Source function is Off.
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This Function is especially useful for the Guestlink RJP.)
OFF
For the specific situation, pls see the table below.
...
ON
Determines the Sub AMP operation mode.
− 0: Turns the Sub AMP function off (PWM off).
− 1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On
2
Volume, the Min Volume, and the Max Volume.
− 2: Determines the volume according to the bathroom control panel
setting.
Sub AMP Volume level at power on initial condition.
6
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
OFF
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Displays a the Welcome Message for 5 seconds when the TV turns On.
OFF
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
on, the Logo is displayed, before the signal from the initial source, for the
OFF
amount of time set in "Logo Display Time".
Downloads the Hospitality logo. Hospitality logo file requirements:
• BMP or AVI files only.
...
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
...
Clone the current TV options to a USB memory device.
-
Clone the saved TV options on a USB memory device to the TV.
-
When Setting Auto Initialize is set to On, and the power is turned off and on
or the Master Power is turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when the Setting Auto Initialize is
OFF
set to On, it will be ignored and the operation will be the same as that when
Setting Auto Initialize is set to Off
29
English