Brookstone IDesign Ultra-Thin Travel Speaker User Manual

Ultra-Thin
Travel Speaker
WorkS WiTh your mp3
player, lapTop aNd more!
IDESIGN
™
LOCATION OF CONTROLS
1. POWER BUTTON
2. POWER LED
3. 3.5mm JACK
3
1
2
INSTALLINg The bATTeRIeS
1. Push down and slide the battery
compartment door open.
2. Insert 3 AAA batteries according
to polarity indicators inside the
compartment.
3. Replace the battery compartment
door by sliding it into place and
snapping it down securely.
uSINg The SpeAkeR
The Ultra-Thin Travel Speaker can
be used with any audio device with
3.5mm output jack, including MP3
players, portable DVD players and
laptop computers.
1. Open the Travel Speaker and
rest it on a flat surface, using
the inverted cover as a stand.
2. Insert one end of the included
3.5mm cable into the 3.5mm
JACK and the other end into
your MP3 player or other
audio source.
3. Press the POWER BUTTON
to turn the speaker on. The
POWER LED will illuminate blue.
4. Press the POWER BUTTON
again to turn the Travel
Speaker off.
Note: Be sure to power off and close
the Travel Speaker before transport.
CARe ANd mAINTeNANCe
• Wipe with a soft, dry cloth to clean.
• Do not use liquid of any sort to
clean the Travel Speaker.
• Remember to securely close the
Travel Speaker before transport,
to avoid damage or breakage.
Merrimack, New Hampshire, USA 03054
800-846-3000 • www.Brookstone.com
607168
Trademark of
New Transducers Limited