Figure 12 Mounting the AP to the T-rail
(1) M4 × 5 screw
Mounting the AP on a ceiling
CAUTION:
•
Verify that the AP is secured to the mounting bracket to avoid falloff.
Do not use this method to mount the AP to a location made of low-intensity materials such as a plaster
•
ceiling. If this installation method is required in such an environment, put a high-intensity plate beneath
the ceiling to secure the installation.
The ceiling tiles must be less than 18 mm (0.71 in) thick, and the ceiling must be able to bear a weight
•
of at least 5 kg (1 1.02 lb).
The three bolt holes are needed for mounting the AP on a ceiling as shown in
2
3
4
1
(2) Mounting hook
10
(3) Mounting clip
(4) Hook
Figure
13.