Summary of Contents for Hitachi Koki N 5008AC2
- Page 1 Stapler N 5008AC2 Read through carefully and understand these instructions before use. Keep this Manual available for others before they use the Stapler. Handling instructions...
-
Page 2: General Operational Precautions
GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING STAPLER 1. Operate the power tool safely for correct uses. Safe operation through correct usage. Do not use the power tool for uses other than those This tool was designed for driving staples into wood specified in this instructions. - Page 3 anyone (including yourself). Even when no staples 17. Take care when stapling thin boards or the corners are loaded at all, it is dangerous to discharge the of wood. tool while pointing it at someone, so never attempt When stapling thin boards, the staples may pass to do so.
-
Page 4: Name Of Parts
NAME OF PARTS Exhaust Cover Piston Body Trigger Piston O-Ring Air Plug Driver Blade Magazine Cover Nose Lock Lever Blade Guide Staple Feeder Magazine Assembly Push Lever Piece Push Lever Firing Head (outlet) Fig. 1 SPECIFICATIONS Type of power Piston reciprocating Air pressure (Gauge) 4.9 –... - Page 5 2. Check on safety STAPLE SELECTION CAUTIONS: Unauthorized persons (including children) must be Choose a suitable staple from Fig. Staples which are not kept away from the equipment. shown in Fig. can not be driven with this tool. Wear eye protection. Check the retaining screws which fix the exhaust 16 Gauge 7/16"...
- Page 6 (2) Place the staple strip over the magazine. CAUTION: Make sure that the staple strip slides freely on the This tool will bounce and shoot several staples instead magazine. (See Fig. 3) of just one in rapid succession when strongly pressed flush against a surface or when using on hard materials.
-
Page 7: Inspection And Maintenance
After stapling: 1. Countermeasure for staple jamming (1) disconnect air hose from the stapler; (1) Remove all staples. (2) remove all staples from the stapler; (2) Release the lock lever and open the blade guide. (See (3) supply 5 – 10 drops of Hitachi pneumatic tool Fig. - Page 8 4. Inspecting the push lever APPLICABLE LUBRICANTS Check if the push lever (Fig. 1) can slide smoothly. Clean up the sliding area of the push lever and use the provided oil for lubrication from time to time. Type of lubricant Name of lubricant Lubrication enables smooth sliding and simultaneously Recommended oil...
- Page 11 Item Item Part Name Q’TY Part Name Q’TY HEX. SOCKET HD. BOLT M5 × 20 COVER SPRING TOP COVER MAGAZINE PIECE EXHAUST COVER PUSHING LEVER PIECE WARNING LABEL(A) STAPLE FEEDER GASKET (F) HINGE PIN GASKET (C) MAGAZINE ASS’Y MACHINE SCREW (W/WASHERS) M5 × 14 EXHAUST VALVE ROLL PIN D3 ×...
- Page 12 Hitachi Koki Co., Ltd. Code No. C99173911 Printed in Taiwan...