Table of Contents
Advertisement
A-1
TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-1)
230 VAC single phase, 40 amps
The Demo Zone is intended for display and demonstration use. It is intended for light duty operation.
The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power
limitation, power sources (except Ranger 250) when used at maximum output must be operated at low
duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.
HEIGHT
53.00 in.
1346.2 mm
INSTALLATION
ELECTRICAL INPUT REQUIREMENTS
Voltage Specification
RATED OUTPUT
PHYSICAL DIMENSIONS
WIDTH
66.00 in.
1676.4 mm
DEMO ZONE
DEPTH
53.00 in.
1707 lbs. (w/o gas cylinders)
2467 lbs. (with gas cylinders)
1346.2 mm
774.3 kg. (w/o gas cylinders)
1119.0 kg. (with gas cylinders)
A-1
Input Connection
Specification
Type 6-50P plug
WEIGHT
Advertisement
Table of Contents
