Assembling Of The Lever (Sub Gear Back L) - Sony HCD-HPZ7 Service Manual

3-8. ASSEMBLING OF THE LEVER (SUB GEAR BACK L)

1 Turn over the stocker assy
in the direction of the arrow.
PRECAUTION DURING GEAR
(SUB GEAR PIN LEFT) INSTALLATION
gear (sub gear pin left)
2 Adjust phases.
gear (stock rotary left)
4 washers (5.5)
3 gear (sub gear pin left)
PRECAUTION DURING SPR-T
(SUB GEAR BACK L) INSTALLATION
6 lever (joint just front)
UPPER
SIDE
lever (sub gear back L)
gear (sub gear pin left)
sub gear (joint just front)
0 screw (M2 × 5)
9 cover (L)
8 SPR-T
(sub gear back L)
5 gear (stock joint),
shaft (stock)
HCD-HPZ7/HPZ9
gear (stock rotary left)
SPR-T (sub gear back L)
qa k tapping screw
(2.6 × 8)
7 lever
(sub gear back L)
45