Sony PMW-350K Operating Instructions Manual page 125

MAINTENANCE
Menu items Sub-item
Timecode TC Out
Makes settings related
to timecode.
DF/NDF
LTC UBIT
Counter Display
Essence Mark Ret Shot Mark 1
Makes settings related
to shot marks and clip
index picture
Ret Shot Mark 2
thumbnails.
Camera Config Rec Tally Blink
Makes settings related
to various camcorder
operations.
Rec Review
Settings
Auto/Generator
DF/NDF
Fix/Time
Counter/Duration
On/Off
On/Off
On/Off
3sec/10sec/Clip
Description
Selects the source for timecode
output.
Auto: During recording, output
values generated by the
timecode generator, and during
playback output values
obtained by the timecode
reader.
Generator: Output values
generated by the timecode
generator during both recording
and playback.
When the Country setting is other
than [PAL Area], selects drop-frame
mode (DF) or non-drop-frame mode
(NDF).
Specifies the data recorded in LTC
user bits.
Fix: Record user-specified data.
Time: Record the current time.
Select the method used to reset the
counter value displayed on the
viewfinder screen.
Counter: Continue to increment
until the RESET button is
pressed.
Duration: Reset each time that
recording is started.
Specify whether to input Shot
Mark1 marks using the RET button
on the lens.
Specify whether to input Shot
Mark2 marks using the RET button
on the lens.
Turns warning flashes by the
TALLY indicator on or off. The
warnings alert you an almost
exhausted battery pack or low
remaining media capacity.
Selects the recording review time.
Clip: Review all of the most
recently recorded clip.
Menu List 125