Sony PMW-350K Operating Instructions Manual page 103

OPERATION
Menu items Sub-item
VF Setting Color
Makes settings related
to the viewfinder
Mode
screen.
Peaking Type
Peaking Frequency
Peaking Color
Peaking Level
DXF Rec Tally
Setting
Marker
Makes settings related
to marker display in the
viewfinder screen.
Center Marker
Center H Position
Center V Position
Settings
–99 to ±0 to +99
Color/B&W
Normal/Color/Both
Normal/High
White/Red/Yellow/Blue
Low/Mid/High
Upper/Both
On/Off
1/2/3/4/Off
–40 to 0 to 40
–40 to 0 to 40
Description
Adjusts the density of the colors
displayed in the viewfinder screen.
Selects Color or B&W as the display
mode of the viewfinder screen.
(Even when B&W is selected, some
indications are always displayed in
color. Examples include tally
indications, thumbnails, and the skin
gate area.)
Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: Both
Selects Normal or High as the
peaking frequency.
When the Peaking Type setting is
Color, selects the peaking color from
among White, Red, Yellow, and
Blue.
When the Peaking Type setting is
Both, selects the color peaking level
from among Low, Mid, and High.
When a separately sold viewfinder is
installed, specified whether to light
the tally indicator on the upper side
only (Upper), or on both the upper
and lower sides (Both).
Turns all markers on or off.
Note
When Marker is assigned to the
ASSIGN. 2 switch, this setting is
disabled.
When the center marker is
displayed, selects the type. Select
Off if you do not want to display the
marker.
Note
When Safety Zone, User Box, and
Guide Frame are set to [On], this
setting cannot be turned on.
Specifies the horizontal position of
the center marker.
Specifies the vertical position of the
center marker.
Menu List 103