Mount As Network Drive - Buffalo LS210D User Manual

Click the icon in the Dock to start NAS Navigator2.
Click your LinkStation's icon to open a share on the LinkStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Name
Open
Refresh
Settings
Configure
Label Color
View Options
Auto Power Mode
To display these options,
hold down the control
key and click your
LinkStation's icon.

Mount as Network Drive

You can map a shared folder as a network drive from NAS Navigator2.
1
Click the icon in the Dock to start NAS Navigator2.
Open Folder
Settings
Configure
Label Color
Description
Opens the default shared folder for a selected
LinkStation.
Searches for NAS devices on the network again.
Opens Settings for the selected LinkStation.
Opens a window that lets you configure the NAS's IP
address or open Settings.
Selects the color of the name displayed below the icon.
Lets you choose icon size, position, and view mode.
Auto power mode can turn supported TeraStations and
LinkStations on the network on and off automatically.
Opens the LinkStation's shared folder.
Opens Settings for the selected LinkStation.
Opens a window that lets you configure the NAS's IP
address or open Settings.
Selects the color of the name displayed below the icon.
93