Canon Digital IXUS 70 User Manual page 154

Igllill.M,g.liljiW'llIlIilRlgliiltlil.rll~
Insufficient light for eSet the flash to
U
(flash on) (Basic
shooting.
Guide p. 14).
...........................................................................
The subject is eSet the exposure compensation to a
underexposed because positive (+) setting (p.
52).
the surroundings are too eUse AE lock or use the spot metering
bright. function (pp. 49, 51 ).
Subject is too far away eShoot within correct flash range of
for flash to reach. the subject when using the built-in
flash (p. 135).
,IRaise the ISO speed and then shoot
(p. 65).
'·mll•• i.···'I.III•••••· • • • · • •
II.'~.~
Subject is too close, eShoot within correct flash range of
making the flash too the subject when using the built-in
strong. flash (p. 135).
...........................
The subject is eSet the exposure compensation to a
overexposed because negative (-) setting (p. 52).
the surroundings are too eUse AE lock or use the spot metering
dark. function (pp. 49, 51).
Too much light is shining eChange the shooting angle.
directly into the camera,
or is being reflected off
the subject.
Flash is set to on.
eSet the flash to ~ (flash off) (Basic
Guide p. 14).
116
ISO speed is too high.
eHigher ISO speeds and the
~
(High
ISO Auto) setting may increase image
noise. For higher image quality, select
as Iowan ISO speed as possible
(p. 65).
eln ~, ~, ~, ~,
II,
lQ
and
D
modes, the ISO speed increases and
noise can appear.