Installation; Ection; Technical Specifications; Support Equipment Required - Lincoln Electric PRINCE IM818 Operator's Manual

S A I

ECTION

T
P
Wire Capacity
Wire Speed
Duty Cycle - 100%
All ratings are at 25V using Argon Gas
Torch weight (less leads & standard barrels)
P
Wire Capacity
Wire Speed *
Spool Size
Duty Cycle - 100%
All ratings are at 25V using Argon Gas
Torch weight (less wire & leads)
S
T
P
A #2 AWG power cable is used on the Prince
end is threaded into the torch body. The power cable fi tting connects to the
Power Block.
(MK P/N 003-1674) when using a Cobramatic
Prince
with a lug connector and should be connected to positive lug of power supply.
C
The Prince™XL Torch comes standard with a poly lined conduit, for running
aluminum wire. The longer fi tting with a shallow groove is used on the torch
end. A set screw located on top of the torch handle secures the conduit in
NSTALLATION
S
ECHNICAL PECIFICATIONS
® XL T - 25'- P/N K2296-2
RINCE ORCH
• .023"-.045" (0.6 - 1.2mm)
solid and hard wire
• .030" - 1/16" (0.8 - 1.6mm)
aluminum and cored wire
• 750 ipm (19.0 mpm) max.
• 200 Amps Air cooled standard, using Air/Water barrel
• 36.4 oz. (1.02 kilogram)
®
XL S G - 25' - P/N K2297-2
RINCE POOL UN
• .023" - .045" (0.6 - 1.2mm)
solid and hard wire
• .030" - 1/16" (0.8 - 1.6mm)
aluminum and cored wire
• 750 ipm (19.0 mpm) max.
• 4 inches (101.6mm)
• 200 Amps Air cooled standard, using Air/Water barrel
• 46.5 oz (1.3 kilogram)
* Maximum ipm varies depending on input voltage, wire size
E R
UPPORT QUIPMENT EQUIRED
• CV or CC power source of suffi cient capacity for your needs.
• Regulated gas supply and hoses.
• Properly sized power leads from power source to wire feeder and
ground.
L C
ORCH EAD ONNECTIONS
C - A C
OWER ABLE IR OOLED
® XL is purchased as a Spool Gun, the power cable comes standard
ONDUIT
Prince XL ® - Owner's Manual - Page 3
and the control box used.
®
XL air cooled torch. The torch
® wire feed cabinet. When the