Table of Contents
Advertisement
Quick Links
Part #44640
ASSEMBLY & OPERATING INSTRUCTIONS
IMPORTANT: Read all instructions carefully before use
ABOUT YOUR SOLAR SECURITY LIGHT
During the day, the solar panel included with this MAXSA Solar Security Light converts sunlight
into electricity, recharging the pre-installed battery. Using this stored energy, the SMT LED lights
turn on automatically at night when motion is detected. This MAXSA Solar Security Light has
an adjustable TIME dial that allows light duration of up to 60 seconds. When the battery is fully
charged, this Solar Security Light can provide up to 200 thirty second cycles when the TIME dial
is set to the middle (30s) position.
The battery included in this unit is a sealed lead-acid 6V, 4Ah rechargeable battery and will need
to be replaced when the charging ability is decreased. The battery should last for approximately
3-5 years before it will need to be replaced
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MAXSA 44640
Summary of Contents for MAXSA 44640
- Page 1 IMPORTANT: Read all instructions carefully before use ABOUT YOUR SOLAR SECURITY LIGHT During the day, the solar panel included with this MAXSA Solar Security Light converts sunlight into electricity, recharging the pre-installed battery. Using this stored energy, the SMT LED lights turn on automatically at night when motion is detected.
- Page 2 Motion-Activated Solar Security Light Carefully remove and identify all the parts from their protective packaging and lay them out in front of you. INCLUDED PARTS Carefully remove and identify all the parts from their protective packaging and lay them out in INCLUDED PARTS: front of you.
- Page 3 Part # 44640 CHOOSING A LOCATION FOR YOUR SOLAR SECURITY LIGHT This Solar Security Light comes complete with a solar panel attached to a 15 foot power cord. For optimum sun exposure and longer light output, place the solar panel in a position that receives at least 6-8 hours of direct sunlight per day.
- Page 4 Motion-Activated Solar Security Light BEFORE FIRST USE OF YOUR SOLAR SECURITY LIGHT Ensure the power switch on the main body of your Security Light is in the OFF position and the solar panel is connected to the light unit. In this position, the solar panel will charge the battery without activating the unit.
- Page 5 Part # 44640 Walk slowly around the area of detection, changing your walking pace until the light comes on. If light does not come on, you may need to adjust the angle of the sensor unit. Make adjustments as needed until the desired level of sensitivity is reached. Re-adjust the TIME and LUX dials when complete.
- Page 6 Consult your local regulations for correct disposal of batteries. The batteries may also be returned to MAXSA Innovations at 8412 Cathedral Forest Dr., Fairfax Station, VA 22039. Do not take apart the batteries since they contain corrosive chemicals.
- Page 7 Part # 44640 TROUBLESHOOTING PROBLEM POSSIBLE SOLUTIONS • Ensure that the power switch on the main body has been turned to the AUTO position. • Ensure that the motion sensor has been positioned to face oncoming movement. • Ensure that the battery has been fully charged in direct sunlight for 3 sunny days.
- Page 8 The obligation of the manufacturer, under this warranty, is limited to servicing and replacing defective parts when the unit is returned to MAXSA Innovations, freight pre-paid during the warranty period. To obtain warranty repair, the purchase receipt should be returned with the product.
Need help?
Do you have a question about the 44640 and is the answer not in the manual?
Questions and answers