1. Manuals
  2. Brands
  3. MAXSA Manuals
  4. Lighting Equipment
  5. Solar 40227
  6. Assembly & operating instructions

MAXSA Solar 40227 Assembly & Operating Instructions

Motion activated security light
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Enlarged version
40227
Your MAXSA Solar Security Light converts sunlight into electricity during the
day, enabling the 80 LED lights to turn on automatically at night when motion is
detected. With this light, walking into the dark will no longer be a problem. You
can also save the environment by conserving energy with these energy-efficient
solar powered LED lights.
Your Solar Security Light can light for up to 2 hours when the battery is fully
charged. With the adjustable TIME dials set to the maximum (+) position, you
can make the light last up to 60 seconds from last detected motion.
The 3 sealed rechargeable NiMH 2100 mAh batteries included with this product
info@maxsainnovations.com
should last for approximately 3 years before they need to be replaced.
v10.2
2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solar 40227 and is the answer not in the manual?

Questions and answers

Related Manuals for MAXSA Solar 40227

Summary of Contents for MAXSA Solar 40227

  • Page 1 40227 Your MAXSA Solar Security Light converts sunlight into electricity during the day, enabling the 80 LED lights to turn on automatically at night when motion is detected. With this light, walking into the dark will no longer be a problem. You can also save the environment by conserving energy with these energy-efficient solar powered LED lights.
  • Page 2 A screw for metal cover Once you have identified all parts, connect the solar charge panel to your Solar Security Light by plugging the 15 foot cord into the cord attached to the bottom of the Solar Security Light. Firmly turn and twist the cords while pressing together for a tight connection.
  • Page 3 Back Front 1. Remove the screw on the right side of your Solar Security Light and slide out the metal mounting bracket to install on the wall. You may install it vertically or more horizontally by screwing onto a solid surface with the 2 supplied screws. Take the main body of your Solar Security Light and fit it on the installed mounting bracket.
  • Page 4 The metal part right above the motion sensor can be rotated clockwise and counter- clockwise to show or hide the 3 adjustment dials (TIME/SENS/LUX). less than 10 When the charging ability of the batteries decrease, you can replace the batteries with three new NiMH 2100 mAh batteries.

Table of Contents