Advertisement
QQ
3 7 63 1515 0
2.2.6 Removing the cassette hanger / cassette holder
(See Fig.3)
• Prior to performing the following procedure, remove the FF /
REW lever assembly.
(1) From the rear of the unit, bend the two tabs f outwards and
disengage the two joints g in the direction of the arrow.
(2) Push the eject lever and remove the cassette holder from
the playback head. Disengage the two joints h of the cas-
sette hanger / cassette holder and the eject lever in the di-
rection of the arrow.
(3) Lift the cassette hanger / cassette holder and disengage
the joint i of the return link and the eject lever.
2.2.7 Removing the reel disc assembly
(See Fig.4)
• Prior to performing the following procedure, remove the FF /
REW lever assembly and the cassette hanger / cassette hold-
er.
(1) Remove the C washer and pull out reel disc assembly.
ATTENTION:
Replace with a new C washer when reattaching.
TE
L 13942296513
2.2.8 Removing the motor assembly
(See Fig.5)
(1) Unsolder the two wires j on the motor assembly.
(2) Turn over the cassette mechanism assembly and remove
the main belt and the sub-belt from the motor pulley.
ATTENTION:
The main belt can now be removed.
(3) Remove the two screws G attaching the motor assembly.
www
.
http://www.xiaoyu163.com
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Cassette hanger
Tab f
Joint g
Tab f
C washer
Q Q
3
6 7
1 3
1 5
C washer
Flywheel (BF)
co
Flywheel (BR)
.
KS-FX483R,KS-FX480R,KS-FX43R
9 4
2 8
Cassette holder
Return link
Joint i
Eject lever
Chassis
Joint h
Joint g
Fig.3
Reel disc assembly
0 5
8
2 9
9 4
2 8
Fig.4
Main-belt
Motor assembly
Sub-belt
E
G
Motor pulley
G
Soldering j
E
m
F
E
Reel base assembly
Fig.5
(No.49812)1-9
9 9
Joint h
9 9
Advertisement
