Lincoln Electric PRECISION TIG 185 Operator's Manual page 31

E-7
PROBLEMS
(SYMPTOMS)
Stick electrode "Blasts Off" when arc
is struck.
Stick electrode "sticks" in the weld
puddle.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
TROUBLESHOOTING
Observe all Safety Guidelines detailed throughout this manual
POSSIBLE
STICK WELDING PROBLEMS
1. Weld current may be set too high
for electrode size. Reduce current
control setting, or use a larger
diameter electrode.
1. The weld current may be set too
low. Increase the current control
setting or use a smaller diameter
electrode.
PRECISION TIG 185
CAUSE
If all recommended possible areas of
misadjustment have been checked
and the problem persists, Contact
your local Lincoln Authorized
Field Service Facility.
CAUTION
RECOMMENDED
COURSE OF ACTION
E-7