Constant bit rate:
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
File system: FAT16, FAT32
USB port: 5V
Support HDD (a portable hard disc drive):
an external power source may be needed.
Power supply rating: AC 220-240V~, 50 Hz
Power consumption: 20 W
Power consumption in standby mode (fast
wakeup disabled): < 0.3 W
Dimensions (w x h x d): 435 x 38 x 212.7
Net Weight: 1.57 kg
Remote control and 2 AAA batteries
AC power cable
Laser Type (Diode): AlGaInN (BD), AlGaInP
Wave length: 398 ~ 412nm (BD), 650 ~
664nm (DVD), 784 ~ 796nm (CD)
Output power (Max ratings): 20mW (BD),
7mW (DVD), 7mW (CD)
, 500mA (for each port)
Risk of electric shock. Never remove the casing of the
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. _____________________________
The buttons on this player do not work.
Disconnect this player from the power
supply for a few minutes, and then
Make sure that the TV is switched to the
correct source input for this player.
For the composite connection (via the
VIDEO connector) to the TV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
No picture on HDMI connection.
Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new