Vizio SB3830-C6M Quick Start Manual page 10

4
Remove the battery cover
by gently sliding it away
from the remote.
6
Turn your TV on, the sound bar will automatically
begin searching for an active input.
The LED indicators on the front of the Sound Bar will
begin cycling in pairs through inputs until an audio
source is detected.*
You can press the INPUT button to switch between
audio sources. For example, if you connected your TV
to Input 1, set the Sound Bar to Input 1.
Tip: Pressing the INPUT button will
* Auto detect function only occurs once when the Sound Bar is first powered on. To enable this feature again, you must do a Factory
Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds.
Top
stop the auto detect function.
5
Insert the included batteries
and gently slide the battery
cover back into place.
Input
10
Top
Power