Mitsubishi XD3500U User Manual page 30

Menu operation (continued)
INSTALLATION menu
ITEM
LAMP MODE
STANDBY MODE
AUTO POWER ON
AUTO POWER OFF
IMAGE CAPTURE
SPLASH SCREEN
BACK COLOR
AV MUTE MODE
IMAGE REVERSE
LENS LOCK
ZOOM/FOCUS LOCK
LENS SHIFT LOCK
LENS SHIFT RESET
• Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
• When the lamp mode is switched, the projected image may fl icker.
• Frequent switching of the lamp mode may damage the lamp.
• You can't set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
• When you continue projection for a long time with BACK COLOR or AV MUTE MODE set to IMAGE, an afterimage may persist
on the screen. Consult your dealer in this case.
• Don't adjust the lens frequently with BACK COLOR set to IMAGE.
Downloaded From projector-manual.com Mitsubishi Manuals
opt.
INSTALLATION
LAMP MODE STANDARD
STANDBY MODE STANDARD
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
IMAGE CAPTURE GO
SPLASH SCREEN ON
ON
BLUE
BACK COLOR
AV MUTE MODE BLACK
IMAGE REVERSE OFF
LENS LOCK
OK
SETTING
STANDARD
LOW
STANDARD
LOW
ON / OFF
OFF / 5-60min
GO
ON / OFF
BLUE / BLACK /
IMAGE
BLACK / IMAGE
OFF
MIRROR
INVERT
MIRROR INVERT
OK
ON / OFF
ON / OFF
OK
INSTALLATION
LENS LOCK
ZOOM/FOCUS
LOCK
LENS SHIFT LOCK
LENS SHIFT
RESET
FUNCTION
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
Select this option when you control the projector via LAN during power
standby.
Select this option when you don't control the projector via LAN during power
standby. This option disables the LAN terminal and reduces the power
consumption during the power standby.
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
Use to capture the screen for the splash screen. (See page 37.)
Choose ON to display the splash screen when the power is turned on.
• The splash screen can be changed. (See page 37.)
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE
is selected, the splash screen will be displayed.
Use to choose the background, either BLACK, or IMAGE, which will be
displayed when the AV MUTE button is pressed. When IMAGE is chosen, the
splash screen will be displayed.
Select when viewing images from the front with the projector installed on the
fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
Select when viewing images from the front with the projector installed on the
ceiling.
The LENS LOCK menu is displayed for the following settings.
Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
Use to enable or cancel the LENS SHIFT LOCK.
Use to reset the position of the lens to the factory setting.
EN-30
opt.
OFF
OFF
OK